Aquverse A3000 Guide d'installation télécharger pdf (Page 4)

4. Using a chopstick or screwdriver, depress the hot tank reset button (water should be hot in 30 minutes time, see

figure R below which pictures hole used to access hot tank reset button)

Figure R

4. Water Is Leaking

a. Identify the source of the leak (i.e. internal, faucets, or top)

b. If the leak is coming from the top of the cooler check the water bottle to make sure there are no visible punctures, or

pinholes. If the water bottle appears to be intact, make sure the cap of the water bottle is secure (see note in General

Trouble Shooting 1. below)

c. If the faucets are the source of the leak, check to make sure the faucets have been screwed on completely. If still

leaking, drain the cooler of water and remove the faucets (see above instructions under Parts Removal section 3), and

make sure the gaskets around the water spigots are in good condition (see figure S). If leaking is occurring from the

nozzle of the faucets please contact customer service at 1-866-872-5722

Figure S

d. If the leak is internal, please contact customer service at 1-866-872-5722

1 2 3 4

Pas de commentaire

Aquverse A3000 Guide d'installation Page 4